A fryer is one of the hardest-working machines in a restaurant. This guide walks you through the decisions that matter — tank size, natural gas or LP, burner power, footprint — and how to keep a fryer running for years.
Commercial floor fryers in the U.S. are usually described by how much oil they hold — 40 lb, 50 lb or 70 lb. A larger tank holds more food per batch and keeps its temperature better when you drop frozen product, but it also costs more to fill and to change oil.
Many kitchens run two fryers instead of one big one — one for fries and vegetables, one for breaded proteins or fish. That keeps flavors and allergens apart and gives you a backup if one unit is down.
3 burners, 90,000 BTU, 15.55″ wide.
View Model4 burners, 120,000 BTU, 15.55″ wide.
View Model5 burners, 150,000 BTU, 21.0″ wide.
View ModelHurakan lists tank capacity in liters. 1 liter of frying oil weighs about 2 lb, so 18.5–23 L is roughly 37–47 lb of oil, 21.4–25 L about 43–51 lb, and 31–37 L about 63–75 lb.
This is not a matter of taste — the fryer must match the gas supply at your location. Most restaurants in cities run on natural gas from the utility line. Food trucks, rural locations and sites without a gas main use LP (propane, also called LPG) from a tank.
Natural gas and propane burn at different pressures, so a fryer built for one cannot simply be connected to the other. Order the right version from the start: Hurakan offers factory-configured LPG versions of the FXF40EW, FXF50EW and FXF70W — no conversion needed on site.
BTU tells you how fast a fryer can put heat back into the oil. When you drop a basket of frozen fries, the oil temperature falls; the time it takes to climb back to setpoint is called recovery. Faster recovery means crispier food, less oil soaked into it and shorter ticket times.
Compare BTU relative to the oil volume, not just the headline number. On Hurakan fryers each burner delivers 30,000 BTU, and burner count grows with the tank: 3 burners on the 40 lb class, 4 on the 50 lb class and 5 on the 70 lb class. All models cover a thermostat range of 200–400°F, which spans every common frying temperature.
Fryers sit in a line under the exhaust hood, so every inch counts. The FXF40EW and FXF50 models are 15.55″ wide; the FXF70W is 21.0″. Depth is about 30″ and height about 46″ on all of them.
FXF50EW and FXF50W connect with a ¾″ NPT male fitting; the FXF70W has a ½″ NPT gas inlet. Installation must be done by a licensed gas fitter, following local codes.
Gas fryers belong under a commercial exhaust hood with fire suppression. Check your local code and your hood length before adding a unit to the line.
The FXF50EW, FXF50W and FXF70W stand on heavy-duty locking casters, so you can roll the fryer out to clean the floor and wall behind it.
| Model | Burners / BTU | Capacity | W × D × H | Gas | Net weight |
|---|---|---|---|---|---|
| HKN-FXF40EWLPG: FXF40EW(LPG) | 3 × 30,00090,000 BTU | 18.5–23 L | 15.55 × 29.9 × 46.06″ | Natural gas / LPG | 125 lbs |
| HKN-FXF50EWLPG: FXF50EW(LPG) | 4 × 30,000120,000 BTU | 21.4–25 L | 15.55 × 29.9 × 46.06″ | Natural gas / LPGStandard gas controls | 141 lbs |
| HKN-FXF50W | 4 × 30,000120,000 BTU | 21.4–25 L | 15.55 × 29.9 × 46.06″ | Natural gasRobertshaw gas valve | 141 lbs |
| HKN-FXF70WLPG: FXF70W(LPG) | 5 × 30,000150,000 BTU | 31–37 L | 21.0 × 29.8 × 45.6″ | Natural gas / LPGRobertshaw gas valves | 165 lbs |
All models: thermostat range 200–400°F, CSA / ETL certified key components, 1-year U.S. warranty on parts & labor. See all gas fryers →
Always follow the cleaning instructions in the user manual for your model. Never add water to hot oil, and never leave a boil-out unattended.
Make sure the gas supply valve is open and other gas appliances are working. If the pilot lights but goes out when you release the knob, the thermocouple is often the cause — call a qualified technician.
Check the thermostat setting and that the burners light along their full length. Overloaded baskets and old, broken-down oil also make recovery slower.
Turn the fryer off right away. Overheating usually points to a thermostat or gas valve problem — this is a job for a technician, not a DIY fix.
Greasy food usually means oil is too cool or the basket is overloaded. Dark food with a bitter taste means the oil is worn out — filter more often and change it on schedule.
Gas appliance repairs must be done by a qualified technician. Hurakan owners can request service on our Service & Support page.
For a menu where fried items are a side, a 40 lb class fryer is usually enough. Busy restaurants typically choose a 50 lb fryer, and high-volume kitchens that fry chicken or fish all day go with 70 lb. Two smaller fryers are often better than one large one.
A conversion requires different gas components and must be done by a qualified technician. It is simpler to order the right version from the start — Hurakan offers factory-configured LPG versions of the FXF40EW, FXF50EW and FXF70W.
Skim and filter the oil daily, and do a full drain and boil-out at least weekly or at every oil change. High-volume kitchens may need to boil out more often.
Most foods fry between 325°F and 375°F — check the recommendation for each product. Hurakan fryers have a thermostat range of 200–400°F.
Hurakan cooking equipment is covered by a 1-year U.S. warranty on parts and labor for electrical and gas components. Full terms are on the Warranty & Terms page.
Tell us your menu and volume — we’ll recommend a model and reply within 24 hours with the best price.