The reach-in is the backbone of back-of-house storage. Pick the wrong size and you either fight for shelf space every Friday night or pay to cool empty air. This guide shows how to size a reach-in, what the spec sheet really tells you, and how the three Hurakan solid-door series differ.
Reach-ins are rated in cubic feet of interior volume. The number that matters is how much product you hold between deliveries. A kitchen that gets produce and dairy every day can live with far less cold storage than one that orders twice a week.
A practical way to size: list what must stay cold overnight on your busiest day (proteins, dairy, prepped sauces, produce), estimate how many full-size sheet pans or cases that is, and leave 20–30% free space. Air has to move around the food — a packed-solid reach-in cools unevenly and works its compressor much harder.
Cafés, bars, small menus, or a dedicated unit for one product group such as dairy or desserts.
The standard choice for full-service restaurants — enough room to separate raw proteins from ready-to-eat food.
High-volume kitchens, commissaries and catering, where one wide unit replaces two smaller ones.
Not sure between sizes? Our 1 vs 2 vs 3 door reach-in guide walks through real kitchen scenarios.
All three Hurakan solid-door series use ventilated (fan-forced) cooling. The differences are in size steps, interior material and controls.
GXE18 / GXE42. Stainless steel inside and out: SUS304 interior, SUS201 exterior, interior LED. 17.2 and 41.9 cu ft. A good fit where you want an all-steel interior that shrugs off scrubbing.
GXE23 / GXE47 / GXE72. The largest capacity per footprint in the line: 23, 47 and 66.5 cu ft, bottom-mounted compressor, solid swing doors. The 3-door GXE72 has a SUS304 interior.
GXE23 / GXE47 / GXE72 …ES. Pre-coated aluminum interior with curved corners, SS430 exterior, Dixell digital controller, internal LED and reversible self-closing doors. 21, 46 and 63 cu ft.
| Model | Doors | Capacity | Width | Interior | Temp. range |
|---|---|---|---|---|---|
| HKN-GXE18R1C | 1 | 17.2 cu ft | 27″ | SUS304 stainless | 33–40°F |
| HKN-GXE23R1E | 1 | 23 cu ft | 29″ | Stainless | 33–41°F |
| HKN-GXE23R1ES | 1 | 21 cu ft | 27″ | Pre-coated aluminum | 33–41°F |
| HKN-GXE42R2C | 2 | 41.9 cu ft | 54″ | SUS304 stainless | 33–40°F |
| HKN-GXE47R2E | 2 | 47 cu ft | 54″ | Stainless | 33–41°F |
| HKN-GXE47R2ES | 2 | 46 cu ft | 54.1″ | Pre-coated aluminum | 33–41°F |
| HKN-GXE72R3E | 3 | 66.5 cu ft1,883 L | 80.9″ | SUS304 stainless | 33–41°F |
| HKN-GXE72R3ES | 3 | 63 cu ft | 80.6″ | Pre-coated aluminum | 33–41°F |
Full dimensions, electrical data and data sheets are on each product page. All reach-in refrigerators →
Want the most storage in a 54″ slot? Look at the GXE47R2E. Want easy-clean rounded corners and a digital controller? The ES series. Want stainless steel on every surface you touch? The C series.
Every refrigerator size has a freezer twin. C and E freezers hold −8 to 0°F; ES freezers have a wider −10 to 10°F setting range. Freezers draw more current than refrigerators of the same size — for example the 2-door GXE47F2E is rated 10.7 A versus 3.8 A for the GXE47R2E — so check your circuits before you add one.
Most full-service restaurants use a 2-door reach-in of about 42–47 cu ft as the main cooler, plus undercounter or prep-table refrigeration at the stations. Small cafés often manage with a 1-door unit; high-volume kitchens choose 3 doors or a walk-in.
C models have SUS304 stainless interiors and SUS201 exteriors; E models offer the largest capacities (23, 47 and 66.5 cu ft) with bottom-mounted compressors; ES models have pre-coated aluminum interiors with curved corners, SS430 exteriors and Dixell digital controllers.
Set it so food stays at 41°F or below — most operators run 36–38°F to leave a safety margin. Hurakan reach-in refrigerators cover 33–40°F or 33–41°F depending on the series.
Stainless steel is the most scratch- and dent-resistant. A pre-coated aluminum interior with curved corners is lighter and very easy to wipe clean. Both are common in commercial refrigeration — choose by how hard your staff treats the cabinet.
Tell us your menu, deliveries and floor plan — we’ll recommend the right reach-in and reply within 24 hours with the best price.
What temperature a commercial refrigerator, freezer, prep table and display case should run at, the 41°F rule, the danger zone, how to log temperatures and where to measure.
Read GuideReach-in or prep table running warm? A step-by-step checklist: power, settings, door seals, airflow, dirty condenser, frost on the evaporator and when to call a refrigeration technician.
Read GuideSolid door or glass door reach-in? Insulation, energy, visibility, cleaning and where each belongs — kitchen, bar, café or store — with Hurakan models of both types.
Read Guide