Skip to main content

Hurakan

Home/Guides/Prep Tables
Buying Guide

Choosing a Pizza Prep Table

Dough, toppings and cold storage in one station

A pizza prep table is where every pie is built: dough is stretched on a deep work surface, toppings come from a refrigerated rail, and backup ingredients wait in the cabinet below. Here is how to size it for your oven and your volume.

Why Not Just Use a Sandwich Table?

The work surface makes the difference

Stretching a 16″ pie needs room. A sandwich prep table has a narrow cutting board meant for bread and wraps; a pizza table gives you a deep work surface in front of the topping rail, plus bigger pans for cheese and sauce. Pizza tables are also usually deeper overall — Hurakan PZ models are 31.5–32.3″ deep — so check your aisle before ordering.

Pizza prep table

  • Deep surface for dough stretching and topping
  • Large pans for high-volume toppings
  • Lots of cabinet storage for dough and cheese

Sandwich prep table

Size It to Your Oven

The make line should keep up with the deck
44–50″
1 door

One pizza maker, one oven. Takeaway shops, bars and restaurants where pizza is one item on a bigger menu.

67″
2 doors

A dedicated pizzeria with a steady dine-in and delivery flow. Room for a second person at peak.

93″
3 doors

High-volume and delivery-heavy pizzerias with two or three makers working side by side.

Compare Hurakan Pizza Tables

From the product pages
ModelWidthDoorsCabinet capacityTemp. rangeBuild
HKN-PZ47R1S44″110.9 cu ft310 L33–41°FSS430 exterior, CAREL control
HKN-PZ50R1E49.8″19.5 cu ft33–40°F6 × 1/3-size pans, work surface 35.3″ high
HKN-PZ70R2S67.1″220.9 cu ft592 L33–41°FSS430 exterior, CAREL control
HKN-PZ93R3S93″330.8 cu ft872 L33–41°FSS430 exterior, CAREL control

All four use ventilated cooling. S models have a pre-coated aluminum interior. All pizza prep tables →

Rule of thumb

Capacity grows faster than width: going from 44″ to 93″ roughly doubles the width but almost triples the cabinet storage (10.9 → 30.8 cu ft). If you prep dough in batches, the bigger table often saves a trip to the walk-in every hour.

Set Up the Make Line

Dough in, pizza out, no crossing paths
  1. Dough on the left, oven on the right(or the reverse) — pick a direction and keep product moving one way.
  2. Sauce and cheese closest to the makerThey go on every pie. Put specialty toppings at the ends of the rail.
  3. Keep the prep table away from the oven mouthRadiant heat from a deck or conveyor oven makes the refrigeration work much harder. Leave a gap or use a heat shield.
  4. Store dough trays in the cabinetProofed dough waits below the work surface, so the maker never leaves the station during a rush.

Frequently Asked Questions

Pizza prep tables
What size pizza prep table do I need?

One maker and one oven usually work well with a 44–50″ table. Busy pizzerias choose 67″, and high-volume shops with several makers use 93″ models.

How cold should a pizza prep table be?

Keep toppings at 41°F or below. Hurakan pizza prep tables hold 33–40°F or 33–41°F depending on the model.

Can I stretch dough directly on the work surface?

Yes — that is what the deep work surface is for. Keep it clean and lightly floured, and wipe it down between batches.

Where should a pizza prep table go relative to the oven?

Close enough that finished pies travel a step or two, but not directly in front of the oven opening, where heat will overload the refrigeration.

Opening a pizzeria?

See our pizzeria equipment list, or ask us to size your make line — we reply within 24 hours.