Skip to main content

Hurakan

Home/Guides/Griddles
How-To

How to Clean & Season a Griddle

Keep the plate smooth, non-stick and rust-free

A well-kept steel griddle plate gets better with age: smooth, dark and naturally non-stick. A neglected one sticks, smokes and transfers burnt flavors to everything. This is the cleaning routine for each part of the day, plus how to season a new plate.

The Daily Routine

From the first order to the last

During service

Scrape the plate with a flat griddle scraper between orders, pushing debris into the grease trough. A clean plate cooks more evenly and keeps flavors separate.

Between rushes

Scrape thoroughly, wipe with a damp, folded cloth held by tongs or a griddle brush, then apply a very thin film of oil.

At closing

Do the full clean below while the plate is still warm.

Every day

Empty and wash the grease trough or tray before it overflows.

Every week

Clean the backsplash, sides and the area under and behind the griddle.

The Closing Clean

Ten minutes, warm plate
  1. Turn the burners downLower the heat but keep the plate warm — residue lifts much more easily from warm steel than cold.
  2. Scrape everything offScrape the whole surface into the trough, including corners and along the backsplash.
  3. ScourWork the plate with a griddle screen and pad holder or a griddle stone, following the grain of the steel, to lift carbon build-up.
  4. Use a griddle cleaner if neededFor heavy build-up, use a cleaner made for griddles and follow its label. Rinse it off completely.
  5. Wipe dryRemove all moisture and residue with clean cloths.
  6. Oil lightlyWipe on a thin film of oil to protect the surface overnight, then turn the burners off.
  7. Empty the troughEmpty, wash and replace the grease trough.

How to Season the Plate

New griddles, or after a deep clean

Seasoning bakes thin layers of oil onto the steel, creating a protective, non-stick surface. Season a new griddle before first use, and re-season after any cleaning that strips the plate back to bare steel. Always follow the instructions in the manual for your model first.

  1. CleanWash off any protective coating as described in the manual, rinse and dry.
  2. HeatHeat the griddle to a medium setting.
  3. Apply a thin layer of oilSpread a thin, even coat of a high-smoke-point cooking oil over the whole surface with a cloth held by tongs.
  4. Let it bakeLeave it until it stops smoking and the surface darkens, then wipe off any excess.
  5. RepeatRepeat two or three times to build up an even, dark layer.

What Not to Do

These damage the plate
Don’tPour cold water or ice onto a hot plate to “steam it clean”.
WhySudden temperature shock can warp the steel. Use griddle cleaner on a warm plate instead.
Don’tUse steel wool or wire brushes on the cooking surface.
WhyThey gouge the plate and leave metal fibers. Use a griddle screen or stone.
Don’tLeave the plate wet overnight.
WhyBare steel rusts quickly. Always dry and oil it after cleaning.
Don’tLet the grease trough overflow.
WhySpilled grease is a fire and slip hazard — empty it daily.

A thick plate is easier to look after: Hurakan manual W-series griddles use a 0.75″ plate that resists warping. Compare models in the griddle buying guide, or see PSXGL36W and PSXGL48W.

Frequently Asked Questions

Griddle cleaning
How often should a commercial griddle be cleaned?

Scrape between orders, clean thoroughly at the end of every day, and clean the surrounding surfaces weekly.

Should I clean a griddle hot or cold?

Warm. Residue lifts much more easily from a warm plate. Avoid very high heat while cleaning and never use cold water on a hot plate.

How do I remove rust from a griddle?

Scour the rusted area with a griddle screen or stone, wipe clean, and re-season the plate with thin layers of oil.

What oil is best for seasoning a griddle?

Use a cooking oil with a high smoke point and apply it in thin layers. Thick layers turn sticky instead of forming a hard seasoning.

Time for a new flat top?

Hurakan griddles come in 24″ to 60″, manual or thermostatic.