Most fryer problems in the middle of service come down to a handful of causes: gas supply, the pilot, the thermostat, or the oil itself. Use this guide to find the likely cause fast — and to know when to stop and call a technician.
Turn off the fryer and the gas supply, do not use switches or flames, ventilate the area and call your gas utility or emergency services. Everything below assumes there is no gas smell.
The checks in this guide are things any trained cook or manager can look at safely. Repairs to gas valves, thermostats, thermocouples and burners must be done by a qualified technician, following the manual for your model.
| Symptom | Likely causes | What to check first |
|---|---|---|
| Pilot will not light | Gas supply off, air in the line after a shutdown, dirty pilot orifice | Is the main gas valve open? Do other gas appliances work? Follow the lighting instructions on the unit. |
| Pilot lights, then goes out | Thermocouple not sensing the flame, draft blowing the pilot out | Look for a strong draft from a fan or door. If it keeps going out, call a technician — the thermocouple may need replacement. |
| Burners will not come on | Thermostat set below oil temperature, pilot out, gas valve issue | Is the pilot lit? Turn the thermostat up and listen for the burners to ignite. |
| Oil heats slowly | Partially lit burners, low gas pressure, overloaded baskets, old oil | Watch the flames: they should burn along the whole burner. Fry smaller batches. Change tired oil. |
| Oil gets too hot | Thermostat or control fault | Turn the fryer off immediately. Do not use it until a technician has checked it. |
| Oil foams or boils over | Water in the oil, worn-out oil, overfilled vat, wet food | Drain and replace old oil, dry the tank after cleaning, shake ice off frozen food, keep oil at the fill line. |
| Yellow, smoky flames | Burner or air shutter needs adjustment, dirty burners | Call a technician for burner adjustment and cleaning. |
Hurakan owners can request service on our Service & Support page. Hurakan fryers include a 1-year U.S. warranty on parts and labor.
The most common reason is a thermocouple that no longer senses the pilot flame, or a draft blowing the flame out. Check for drafts first; if it still goes out, call a qualified technician.
Foaming usually means water in the oil, oil that is worn out, or an overfilled vat. Replace the oil, dry the tank thoroughly and shake ice off frozen product.
Check that all burners light along their full length. Low gas pressure, overloaded baskets and old oil also slow heating and recovery.
Turn it off immediately and do not use it until a technician has inspected the thermostat and gas controls.
Hurakan gas floor fryers come in 40, 50 and 70 lb classes, for natural gas or LPG.
Signs your commercial fryer oil is worn out, what breaks oil down, how filtering and good habits extend oil life, and a simple oil log for your kitchen.
Read GuideWhat 40, 50 and 70 lb fryer classes mean, how oil capacity relates to burners, BTU and footprint, and which size fits a café, restaurant or high-volume kitchen.
Read GuideNatural gas or propane for a commercial deep fryer? How the two fuels differ, why a fryer must match your gas supply, conversion facts and factory LPG fryer…
Read Guide